EasyManuals Logo
Home>Cisco>Network Router>A9K-MOD400-TR

Cisco A9K-MOD400-TR User Manual

Cisco A9K-MOD400-TR
172 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #156 background imageLoading...
Page #156 background image
7. If you want to disable the Cisco Discovery Protocol (CDP), which is not required, use this command:
RP/0/RSP0/CPU0:router(config-if)# no cdp
8. Add any other configuration subcommands required to enable routing protocols and adjust the interface
characteristics. Examples of such subcommands are:
RP/0/RSP0/CPU0:router(config-if)# flow-control ingress
RP/0/RSP0/CPU0:router(config-if)# mtu 1448
RP/0/RSP0/CPU0:router(config-if)# mac-address 0001.2468.ABCD
9. When you have included all the configuration subcommands to complete the configuration, enter the
commit command to commit all changes you made to the running configuration.
RP/0/RSP0/CPU0:router(config-if)# commit
10. Enter Ctrl-Z to exit configuration mode. If you did not enter the commit command, you will be prompted
to do so:
RP/0/RSP0/CPU0:router(config-if)#
Uncommitted changes found, commit them before exiting(yes/no/cancel)? [cancel]:
Answer yes to commit, no to exit without a commit, or cancel to cancel the exit (default).
11. Write the new configuration to memory:
RP/0/RSP0/CPU0:router# copy run
disk0:/config/running/alternate_cfg:/
router.cfg
Destination file name (control-c to abort): [/router.cfg]?
The destination file already exists. Do you want to overwrite? [no]: yes
Building configuration.
223 lines built in 1 second
[OK]
The system displays an OK message when the configuration has been stored.
Configuring the Dual-Rate Line Cards
Oversubscription will be supported on these line cards in a future release of IOS XR 6.2.x train.
Note
The 24-port and 48-port dual-rate line cards support GE and 10GE speeds.
See 24-Port 10-Gigabit Ethernet/Gigabit Ethernet Line Card with SFP+ or SFP and 48-Port 10-Gigabit
Ethernet/Gigabit Ethernet Line Card with SFP+ or SFP sections in the Cisco ASR 9000 Series Aggregation
Services Router Ethernet Line Card Installation Guide for information on the line cards.
Note
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
142
Verifying and Troubleshooting the Line Card Installation
Configuring the Dual-Rate Line Cards

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco A9K-MOD400-TR and is the answer not in the manual?

Cisco A9K-MOD400-TR Specifications

General IconGeneral
BrandCisco
ModelA9K-MOD400-TR
CategoryNetwork Router
LanguageEnglish

Related product manuals