Cisco A9K-MOD400-TR User Manual

4-Port 10-Gigabit Ethernet Line Card with XFP
The 4-Port 10-Gigabit Ethernet (GE) line card provides four cages for XFP Ethernet optical interface modules
that operate at a rate of 10 Gbps. The four XFP modules can be 10GE Ethernet multimode connections. For
supported tranceiver modules, see
The 4-Port 10GE line card is available in base, extended, and low-queue versions. All versions are functionally
equivalent, but vary in configuration scale and buffer capacity.
Each XFP cage on the 4-Port 10GE line card has an adjacent Link LED visible on the front panel. The Link
LED indicates the status of the associated XFP port, as described in Line Card LEDs, on page 138.
The following figure shows the 4-Port 10GE line card front panel and LEDs.
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
19
Overview
4-Port 10-Gigabit Ethernet Line Card with XFP

Cisco A9K-MOD400-TR Specifications

General

Brand	Cisco
Model	A9K-MOD400-TR
Category	Network Router
Language	English