Please do not power cycle, reload the router or reset any nodes until all upgrades are
completed.
Please check the syslog to make sure that all nodes are upgraded successfully.
If you need to perform multiple upgrades, please wait for current upgrade to be completed
before proceeding to another upgrade. Failure to do so may render the cards under upgrade
to be unusable.
Additional References
The following sections provide references related to hardware management on Cisco IOS XR software.
Related Documents
Document TitleRelated Topic
Hardware Redundancy and Node Administration
Commands on the Cisco ASR 9000 Series Router
module of Cisco ASR 9000 Series Aggregation
Services Router System Management Command
Reference
Cisco IOS XR hardware commands
See Cisco Carrier Routing System Install and
Upgrade Guides at:
http://www.cisco.com/en/US/products/ ps5763/
prod_installation_guides_list.html
Cisco IOS XR hardware documentation
Cisco ASR 9000 Series Aggregation Services
Router Getting Started Guide
Information about getting started with Cisco IOS XR
software
Cisco ASR 9000 Series Aggregation Services
Router ROM Monitor Guide
ROM Monitor
Cisco ASR 9000 Series Aggregation Services
Router Commands Master List
Cisco IOS XR command master list
Configuring AAA Services on the Cisco ASR 9000
Series Router module of Cisco ASR 9000 Series
Aggregation Services Router System Security
Configuration Guide
Information about user groups and task IDs
Standards
TitleStandards
—
No new or modified standards are supported by this
feature, and support for existing standards has not
been modified by this feature.
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
127
Managing the Router Hardware
Additional References
To Next Page
Loading...
Need help?
General
