PurposeCommand or Action
Takes out the profile command that is configured
in the global configuration.
Remove the line with the command hw-module profile scale
from the file created in the previous step.
Step 2
configure
Step 3
Replaces the running configuration with the edited
file.
load new-config-file
Example:
RP/0/RSP0/CPU0:router(config)# load new-config-file
Step 4
Commits the changed configuration to the router.commit replace
Example:
RP/0/RSP0/CPU0:router(config)# commit replace
Step 5
Additional References
Related Documents
Document TitleRelated Topic
Hardware Redundancy and Node Administration
on the Cisco ASR 9000 Series Router module of
Cisco ASR 9000 Series Aggregation Services Router
System Management Command Reference
Profile commands
Cisco ASR 9000 Series Aggregation Services Router
Commands Master List
Cisco IOS XR master command index
Configuring AAA Services on the Cisco ASR 9000
Series Router module of Cisco ASR 9000 Series
Aggregation Services Router System Security
Configuration Guide
Information about user groups and task IDs
Standards and RFCs
TitleStandard/RFC
—
No new or modified standards are supported by this
feature, and support for existing standards has not
been modified by this feature.
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
10
Configuring Profiles
Additional References
To Next Page
Loading...
Need help?
General
