Call Home maps the syslog severity level to the corresponding Call Home severity level for syslog port group
messages.
Call Home Message Levels
Call Home allows you to filter messages based on their level of urgency. You can associate each destination
profile (predefined and user-defined) with a Call Home message level threshold. The Call Home message
level ranges from 0 (lowest level of urgency) to 9 (highest level of urgency). Call Home messages are generated
if they have a severity level equal to or greater than the Call Home message level threshold for the destination
profile.
Call Home messages that are sent for syslog alert groups have the syslog severity level mapped to the Call
Home message level.
Call Home does not change the syslog message level in the message text.Note
The following table lists each Call Home message level keyword and the corresponding syslog level for the
syslog port alert group.
Table 33: Severity and syslog Level Mapping
Descriptionsyslog LevelKeywordCall Home Level
Network-wide
catastrophic failure.
N/ACatastrophic9
Significant network
impact.
N/ADisaster8
System is unusable.Emergency (0)Fatal7
Critical conditions that
indicate that immediate
attention is needed.
Alert (1)Critical6
Major conditions.Critical (2)Major5
Minor conditions.Error (3)Minor4
Warning conditions.Warning (4)Warning3
Basic notification and
informational messages.
Possibly independently
insignificant.
Notice (5)Notification2
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
310
Configuring Call Home
Call Home Message Levels
To Next Page
Loading...
Need help?
General
