Call Home Alert Groups
An alert group is a predefined subset of alerts or events that Call Home detects and reports to one or more
destinations. Alert groups allow you to select the set of alerts that you want to send to a predefined or custom
destination profile. Alerts are sent to e-mail destinations in a destination profile only if that alert belongs to
one of the alert groups associated with that destination profile and if the alert has a Call Home message severity
at or above the message severity set in the destination profile.
The following table lists supported alert groups and the default CLI command output included in Call Home
messages generated for the alert group.
Table 32: Alert Groups and Executed Commands
Executed CommandsDescriptionAlert Group
show environment
show logging
show inventory
show environment trace
show diag
Events related to power, fan, and
environment-sensing elements such
as temperature alarms.
Environmental
admin show platform
admin show version
admin show diag
admin show inventory oid
Inventory status that is provided
whenever a unit is cold booted, or
when FRUs are inserted or
removed. This alert is considered
a noncritical event, and the
information is used for status and
entitlement.
Inventory
admin show version
admin show logging
admin show inventory
Events generated by specific
interesting syslog messages
Syslog
•
show version
•
show running config all
•
show inventory
•
show configuration history
last 30
•
show configuration commit
changes last 1
User-generated request for
configuration or configuration
change event.
Configuration
By default, this alert group has no
commands to be run. You can add
the required commands that need
to be run.
This alert group can be configured
for periodic notifications
Snapshot
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
309
Configuring Call Home
Call Home Alert Groups
To Next Page
Loading...
Need help?
General
