Related Topics
Configuring a PTP Slave Interface, on page 241
Configuring PTP Clock Settings for the Telecom Profile
Perform this task to configure clock settings to be consistent with ITU-T Telecom Profiles for Frequency.
SUMMARY STEPS
1.
configure
2.
ptp
3.
clock
4.
domain
5.
timescale
6.
time-source source
7.
exit
8.
clock-selection telecom-profile
9.
clock-advertisement telecom-profile
10.
Use one of these commands:
•
end
•
commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Enters PTP configuration mode.ptp
Example:
RP/0/RSP0/CPU0:router(config)# ptp
RP/0/RSP0/CPU0:router(config-ptp)#
Step 2
Enters PTP clock configuration mode.clock
Example:
RP/0/RSP0/CPU0:router(config-ptp)# clock
RP/0/RSP0/CPU0:router(config-ptp-clock)#
Step 3
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
255
Configuring PTP
Configuring PTP Clock Settings for the Telecom Profile
To Next Page
Loading...
Need help?
General
