Cisco A9K-SIP-700 User Manual

PurposeCommand or Action
Sets the domain number for the PTP profile. The allowed domain
number range for G.8265.1 profile is between 4 and 23 and the range
for G.8275.1 profile is between 24 and 43.
domain
Example:
RP/0/RSP0/CPU0:router(config-ptp)# domain
4
Step 4
Sets the timescale to PTP.timescale
Example:
RP/0/RSP0/CPU0:router(config-ptp-clock)#
timescale ptp
Step 5
Sets the time source advertised in Announce messages. Valid options
are: atomic-clock, GPS, hand-set, internal-oscillator, NTP, other,
PTP, terrestrial-radio.
time-source source
Example:
RP/0/RSP0/CPU0:router(config-ptp-clock)#
time-source ptp
Step 6
Exits PTP clock configuration mode.exit
Example:
RP/0/RSP0/CPU0:router(config-ptp-clock)#
exit
Step 7
Specifies that the clock selection behavior, i.e, the best master clock
algorithm in use, follows the telecom profile for frequency (ITU-T
G.8265.1).
clock-selection telecom-profile
Example:
RP/0/RSP0/CPU0:router(config-ptp)#
clock-selection telecom-profile
Step 8
Specifies that the parameters used in Announce messages follows
the Telecom profile for frequency (ITU-T G.8265.1).
clock-advertisement telecom-profile
Example:
RP/0/RSP0/CPU0:router(config-ptp)#
clock-advertisement telecom-profile
Step 9
Saves configuration changes.Use one of these commands:
Step 10
•
end
•
When you issue the end command, the system prompts you to
commit changes:
Uncommitted changes found, commit them
before exiting(yes/no/cancel)? [cancel]:
•
commit
Example:
RP/0/RSP0/CPU0:router(config-ptp)# end
◦
Entering yes saves configuration changes to the running
configuration file, exits the configuration session, and
returns the router to EXEC mode.
or
RP/0/RSP0/CPU0:router(config-ptp)# commit
◦
Entering no exits the configuration session and returns
the router to EXEC mode without committing the
configuration changes.
◦
Entering cancel leaves the router in the current
configuration session without exiting or committing the
configuration changes.
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
256
Configuring PTP
Configuring PTP Clock Settings for the Telecom Profile

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English