OpenFlow Switch Types Supported on ASR9KOpenFlow Matches
Applied to L3 or L3 VRF interfaceApplied to L2 Bridge domain
NoNoNoNoTarget
address for
ND
OFPXMT_OFB_IPV6_ND_TARGET
NoNoNoNoSource
link-layer for
ND
OFPXMT_OFB_IPV6_ND_SLL
NoNoNoNoTarget
link-layer for
ND
OFPXMT_OFB_IPV6_ND_TLL
NoNoNoNoMPLS labelOFPXMT_OFB_MPLS_LABEL
NoNoNoNoMPLS TCOFPXMT_OFB_MPLS_TC
NoNoNoNoMPLS BoS
bit
OFPXMT_OFP_MPLS_BOS
NoNoNoNoPBB I-SIDOFPXMT_OFB_PBB_ISID
NoNoNoNoLogical Port
Metadata
OFPXMT_OFB_TUNNEL_ID
NoNoNoNoIPv6
Extension
Header
pseudo-field
OFPXMT_OFB_IPV6_EXTHDR
OpenFlow Actions
Packet forwarding and packet modification types of actions are supported. The lists of actions are always
immediately applied to the packet.
Note
• Only “Apply-actions” instruction (OFPIT_APPLY_ACTIONS) of OpenFlow 1.3 is supported.
•
Pipeline processing instructions that allow packets to be sent to subsequent tables for further processing
are not supported in this release.
•
Group tables and Meter tables are not supported.
Following table shows the list of action types supported on ASR9K for various table types.
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
282
Implementing Open Flow Agent
OpenFlow Actions
To Next Page
Loading...
Need help?
General
