OpenFlow Switch Types Supported on ASR9KOpenFlow Matches
Applied to L3 or L3 VRF interfaceApplied to L2 Bridge domain
YesYesYesNoTCP
destination
port
OFPXMT_OFB_TCP_DST
YesYesYesNoUDP source
port
OFPXMT_OFB_UDP_SRC
YesYesYesNoUDP
destination
port
OFPXMT_OFB_UDP_DST
YesYesYesNoSCTP source
port
OFPXMT_OFB_SCTP_SRC
NoNoNoNoSCTP
destination
port
OFPXMT_OFB_SCTP_DST
NoNoNoNoICMP typeOFPXMT_OFB_ICMPV4_TYPE
NoNoNoNoICMP codeOFPXMT_OFB_ICMPV4_CODE
NoNoNoNoARP opcodeOFPXMT_OFB_ARP_OP
NoNoNoNoARP source
IPv4 address
OFPXMT_OFB_ARP_SPA
NoNoNoNoARP target
IPv4 address
OFPXMT_OFB_ARP_TPA
NoNoNoNoARP source
hardware
address
OFPXMT_OFB_ARP_SHA
NoNoNoNoARP target
hardware
address
OFPXMT_OFB_ARP_THA
YesNoYesNoIPv6 source
address
OFPXMT_OFB_IPV6_SRC
YesNoYesNoIPv6
destination
address
OFPXMT_OFB_IPV6_DST
NoNoNoNoIPv6 Flow
Label
OFPXMT_OFB_IPV6_FLABEL
NoNoNoNoICMPv6 typeOFPXMT_OFB_ICMPV6_TYPE
NoNoNoNoICMPv6 codeOFPXMT_OFB_ICMPV6_CODE
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
281
Implementing Open Flow Agent
OpenFlow Matches
To Next Page
Loading...
Need help?
General
