OpenFlow Switch Types Supported on ASR9KOpenFlow Matches
Applied to L3 or L3 VRF interfaceApplied to L2 Bridge domain
L3_DSL3_V4L2_L3L2 onlyDescriptionOXM Flow match field
type for OpenFlow
basic class
YesYesYesYesSwitch input
port
OFPXMT_OFB_IN_PORT
NoNoNoNoSwitch
physical port
OFPXMT_OFB_IN_PHY_PORT
NoNoNoNoMetadata
passed
between
tables
OFPXMT_OFB_METADATA
YesNoYesYesEthernet
destination
address
OFPXMT_OFB_ETH_DST
YesNoYesYesEthernet
source
address
OFPXMT_OFB_ETH_SRC
YesNoYesYesEthernet
frame type
OFPXMT_OFB_ETH_TYPE
YesNoYesYesVLAN IDOFPXMT_OFB_VLAN_VID
YesNoYesYesVLAN
priority
OFPXMT_OFB_VLAN_PCP
YesYesYesNoIP DSCP (6
bits in ToS
field)
OFPXMT_OFB_IP_DSCP
NoNoNoNoIP ECN (2
bits in ToS
field)
OFPXMT_OFB_IP_ECN
YesYesYesNoIP protocolOFPXMT_OFB_IP_PROTO
YesYesYesNoIPv4 source
address
OFPXMT_OFB_IPV4_SRC
YesYesYesNoIPv4
destination
address
OFPXMT_OFB_IPV4_DST
YesYesYesNoTCP source
port
OFPXMT_OFB_TCP_SRC
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
280
Implementing Open Flow Agent
OpenFlow Matches
To Next Page
Loading...
Need help?
General
