Cisco A9K-SIP-700 User Manual

DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Enters flow exporter map configuration mode.
flow exporter-map fem-name
Step 2
Example:
RP/0/RSP0/CPU0:router(config)# flow
exporter-map fem
A single flow monitor map can support up to eight
exporters.
Note
Configures the export destination for the flow exporter map. The
destination location argument can be a hostname or an IP address.
destination location
Example:
RP/0/RSP0/CPU0:router(config-fem)#
destination 10.0.1.2
Step 3
Specifies export version parameters and enters the flow exporter
map version configuration mode.
version v9
Example:
RP/0/RSP0/CPU0:router(config-fem)#
version v9
Step 4
Commits the configuration changes to running to the running
configuration.
commit
Example:
RP/0/RSP0/CPU0:router(config-fem-ver)#
commit
Step 5
Exits flow exporter map version configuration mode and enters
global configuration mode.
exit
Example:
RP/0/RSP0/CPU0:router(config-fem-ver)#
exit
Step 6
Creates a monitor map and configures a monitor map name and
enters flow monitor map configuration mode
flow monitor-map map-name
Example:
RP/0/RSP0/CPU0:router(config)# flow
monitor-map mmap
Step 7
Configures the flow record map name for IPv4. By default, the
originating autonomous system (AS) numbers are collected and
exported.
record ipv4
Example:
RP/0/RSP0/CPU0:router(config-fmm)# record
ipv4
Step 8
Associates an exporter map with a monitor map.
A single flow monitor map can support up to eight
exporters.
Note
exporter map-name
Example:
RP/0/RSP0/CPU0:router(config-fmm)#
exporter fmap
Step 9
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
295
Implementing Open Flow Agent
Configuring NetFlow for the OpenFlow Agent

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English