Drivers & Utilities
Driver Installation 4 - 7
4
Driver Installation Procedure
Insert the Device Drivers & Utilities + User’s Manual
disc into an attached DVD drive and click Install Driv-
ers (button).
Chipset
1. Click 1.Install Chipset Driver > Yes.
2. Click Next > Accept > Install.
3. Click Finish.
4. Click Restart Now to restart the computer.
NVIDIA Video (VGA)
1. Click 2.Install VGA Driver > Yes.
2. Click AGREE AND CONTINUE (button) to
accept the terms of the license agreement.
3. Click Next.
4. Click the Close to complete the installation.
5. After all the drivers have been installed (an
internet connection is required) run the
NVIDIA GeForce Experience by clicking the
desktop icon (or App).
6. Restart the computer and run the application
again after restart
.
Note: After installing the video driver go to the Dis-
play/Display Settings control panel to adjust the vid-
eo settings to the highest resolution.
LAN
Note: If the computer enters a deep sleep mode during
installation, you will be prompted to plug in a network
cable, and click OK, to continue installation. If a net-
work cable is not available, restart the system and re-
install the LAN driver.
1. Click 3.Install LAN Driver > Yes.
2. Click Next.
3. Click the button to accept the license agreement
and click Next.
4. Click Next > Install.
5. Click Finish > Yes to restart the computer.
Card Reader
1. Click 4.Install Cardreader Driver > Yes.
2. Click Finish.
To Next Page
Loading...
Need help?
General
