Control Center & Flexikey®
Statistics B - 41
B
Statistics
The Statistics tab allows you to record keys used in any application, and to disable any infrequently, or unused,
keys to save any accidental incorrect key presses.
1. Click the
Statistics
Tab, and press
Start Record
to start recording the frequency of key presses for keys used.
2. You can then go to the application you wish to use the profile for, and use the application as normal so that a
standard set of keys used may be recorded.
3. Return to the Flexikey® application and press Stop Record to stop recording.
4. At the end of the recording process colors will represent the frequency of key presses, with red as the most
frequent through to lighter blue the less frequent (the color bar at the bottom of the screen displays the color
code against the number of key presses).
5. Under Quick Disable click the color which corresponds to the keys you wish to disable.
6. All disabled keys will then change to gray and will be disabled under this profile.
Figure B - 32 - Statistics
To Next Page
Loading...
Need help?
General
