Power Management
3 - 2 The Power Sources
3
The Power Sources
The computer can be powered by either the 2 AC/DC adapter s and power converter
supplied, or by a battery pack.
AC/DC Adapters and Power Converter
Use only the AC/DC adapters and converter that come with your computer. The
wrong type of AC/DC adapter will damage the computer and its components.
1. You must use the power converter supplied with the dual AC/DC adapters
connected to power this computer. Do not use a single AC/DC adapter to
power the system.
2. When first setting up the computer use the following procedure (as to
safeguard the computer during shipping, the battery will be locked to not power the
system until first connected to thepower converter and AC/DC adapters and
initially set up as below):
• Attach the power converter to the DC-In jack at the rear of the computer then plug AC/DC adapt-
ers into the jacks at the rear of the converter, then plug the AC power cords into an outlet, and con-
nect the AC power cords to the AC/DC adapters and leave them there for 6 seconds or longer.
• Remove the adapter cords from the power converter’s DC-In jacks, and then plug them back in again; the bat-
tery will now be unlocked.
3. Raise the lid/LCD to a comfortable viewing angle.
4. Press the power button to turn “On”.
Forced Off
If the system “hangs”,
and the Ctrl + Alt + Del
key combination doesn’t
work, press the power
button for 4 seconds, or
longer, to force the sys-
tem to turn itself off.
To Next Page
Loading...
Need help?
General
