Cub Cadet Challenger 550 User Manual

4‐35
Engine
4.
Tighten the crankcase bolts (1) in a
cross pattern in stages.
10 Nm or 7 ft lbs
5.
Apply sealant (4) to crankcase bolt
(2) And install
10 Nm or 7 ft lbs
6.
Tighten the crankcase bolts (3)
26 Nm or 19 ft lbs
Left Crankcase
Right Crankcase
Caution:
Before installing and torque is applied,
be sure to check that the transmission
is functioning properly by rotating the
shift drum manually in both directions.
Installing the shift levers
1.
Shift lever 2 assembly (1)
14 Nm or 10 ft lbs
2.
Shift lever 1 (2)
Note:
When installing the shift lever 1, align
the punch mark (a) on the shift lever 1
with the punch mark (b) on the shift
lever 2.

Cub Cadet Challenger 550 Specifications

General

Brand	Cub Cadet
Model	Challenger 550
Category	Utility Vehicle
Language	English