Cub Cadet Challenger 550 User Manual

5‐65
Chassis
Checking the fuel pump operation
1. Remove the seat bottom and
cover
2. Disconnect the pressure
feed fuel hose.
3. Connect a fuel pressure
gauge.
4. Turn the ignition switch to the run
position. Do not start the engine.
5. Fuel Pressure should read 42-
45 PSI
6. Turn the key to the off position.
7. Attach the fuel line back to its
original position.
8. Install the cover and seat bottom.

Cub Cadet Challenger 550 Specifications

General

Brand	Cub Cadet
Model	Challenger 550
Category	Utility Vehicle
Language	English