D-Link DSR-500N User Manual

D-Link DSR-Series User Manual 174
Section 9 - Maintenance
Path: Maintenance > Management > SNMP > SNMP Trap List
To create a new SNMP trap:
1. Click Maintenance > Management > SNMP > SNMP Trap List tab.
SNMP Trap List
2. Right-click an entry and select either Edit or Delete. To add a new trap, click Add SNMP Trap.
3. Complete the elds from the table below and click Save.
Field Description
IP Address The IP Address of the SNMP trap agent.
Port The SNMP trap port to which the trap messages will be sent.
Community
The community string to which the agent belongs. Most agents are congured to listen for traps in the
Public community.
Authentication Type The SNMP version used by the trap agent. The choices are v1, v2c, or v3.
Save Click to save and activate your settings.

D-Link DSR-500N Specifications

General

Brand	D-Link
Model	DSR-500N
Category	Network Router
Language	English