D-Link DSR-500N User Manual

D-Link DSR-Series User Manual 73
Section 5 - Connect to the Internet
LAN Settings
Path: Network > IPv6 > LAN Settings > IPv6 LAN Settings
In IPv6 mode, the LAN DHCP server is disabled by default (similar to IPv4 mode). The DHCPv6 server will serve
IPv6 addresses from congured address pools with the IPv6 Prex Length assigned to the LAN.
The default IPv6 LAN address for the router is fec0::1. You can change this 128-bit IPv6 address based on your
network requirements. The other eld that denes the LAN settings for the router is the prex length. The IPv6
network (subnet) is identied by the initial bits of the address called the prex. By default this is 64 bits long. All
hosts in the network have common initial bits for their IPv6 address; the number of common initial bits in the
network’s addresses is set by the prex length eld.
To congure IPv6 LAN settings on the router:
1. Click Network > IPv6 > LAN Settings > IPv6 LAN Settings.
2. Complete the elds in the table on the next page and click Save.
DHCPv6 Server

D-Link DSR-500N Specifications

General

Device Type	VPN Router
WAN Ports	1
LAN Ports	4
Wireless Standard	802.11n
Wireless Speed	300 Mbps
Frequency Band	2.4 GHz
Firewall	Yes
VPN Support	Yes
USB Ports	1
QoS	Yes