Dell PowerConnect W-IAP175P User Manual

120 | Authentication Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide
l Message-Auth
l NAS-Port-Type
l Password
l Password-Retry
l Port-Limit
l Prefix
l Prompt
l Rad-Authenticator
l Rad-Code
l Rad-Id
l Rad-Length
l Reply-Message
l Revoke-Text
l Server-Group
l Server-Name
l Service-Type
l Session-Timeout
l Simultaneous-Use
l State
l Strip-User-Name
l Suffix
l Termination-Action
l Termination-Menu
l Tunnel-Assignment-Id
l Tunnel-Client-Auth-Id
l Tunnel-Client-Endpoint
l Tunnel-Connection-Id
l Tunnel-Medium-Type
l Tunnel-Preference
l Tunnel-Private-Group-Id
l Tunnel-Server-Auth-Id
l Tunnel-Server-Endpoint
l Tunnel-Type
l User-Category
l User-Name
l User-Vlan
l Vendor-Specific
Management Authentication Settings
Use this page to specify authentication for access to the Virtual Controller Management user
interface.
1. Navigate to the Settings link in the Dell W-Series Instant UI.

Dell PowerConnect W-IAP175P Specifications

General

Brand	Dell
Model	PowerConnect W-IAP175P
Category	Wireless Access Point
Language	English