Dell PowerConnect W-IAP175P User Manual

68 | Wireless Network Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide
Figure 42 - Adding a Guest Network — Access Rules Tab
6. Click Finish. The network is added and listed in the Networks tab.
Editing a Network
To edit a network:
1. In the Networks tab, select the network that you want to edit. The edit link appears.
2. Click the edit link. The Edit network window appears.
3. Make the required changes in any of the tabs. Click Next or the tab name to move to the next
tab.
4. Click Finish.
Deleting a Network
To delete a network:
1. In the Networks tab, click the network which you want to delete. A x link appears against the
network to be deleted.
2. Click x. A delete confirmation window appears.
3. Click Delete Now.
Number of WLAN SSIDs Supported
By default, you can create up to six networks or WLANs. You can enable the Extended SSID
option and create up to 16 WLANs. W-IAP175P, W-IAP104, and W-IAP105 devices support up
to 8 SSIDs and W-IAP3WNP, W-IAP92, W-IAP93, W-IAP134, and W-IAP135 devices support
up to 16 SSIDs. After you enable this option, the number of SSIDs that become active on each
W-IAP depends on the W-IAP platform.
NOTE: Enabling the Extended SSID option disables mesh.

Dell PowerConnect W-IAP175P Specifications

General

Brand	Dell
Model	PowerConnect W-IAP175P
Category	Wireless Access Point
Language	English