Dell PowerConnect W-IAP175P User Manual

60 | Wireless Network Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide
n Role-based— Select Role-based if you want to specify per-user access rules. See "Creating a
New User Role" on page 145 for more information.
n Unrestricted— Select this to set no restrictions on access based on destination or type of
traffic.
Figure 38 - Adding a Voice Network— Access Rules Tab
12. Click Finish. The network is added and listed in the Networks tab.
Guest Network
The Guest wireless network is created for guests, visitors, contractors, and any non-employee users
who use the enterprise Wi-Fi network. The Virtual Controller assigns the IP address for the guest
clients. Captive portal or passphrase based authentication methods can be set for this wireless
network. Typically, a guest network is an un-encrypted network. However, you can specify
encryption settings in the Security tab.
Adding a Guest Network
This section provides the procedure to add a guest network.

Dell PowerConnect W-IAP175P Specifications

General

Brand	Dell
Model	PowerConnect W-IAP175P
Category	Wireless Access Point
Language	English