Power Controller Power Controller management
Digi CM User Guide 127
6 Check Everyone and click Save to flash.
7 Enter the username that will NOT have access, uncheck the Access types that are restricted, and
click Add.
Note Port is access to the port. Monitor is access to sniff. Power is access to the power
management.
8 Click Save to flash and repeat steps 7 and 8 for additional users.
9 When all users have been added Click Save & apply.
Note Gilligan does not have access to Outlet # 4.
Power Controller management
The Power Controller Management option allows you to change outlet settings or get a quick
update of the power controller status.
1 Under Power Control click Management.
The Power controller management screen gives a quick view of all the power controllers and the
current status of the connection. The Port # and Manufacturer fields are a link to the specific power
controller statistic page, which displays information for the power controller. If the status is
‘Disconnected’ the links are inactive.
2 Click either the Port # or the power controller title.
To Next Page
Loading...
Need help?
General
