Digi CM 8 User Manual

Configuration menu Sniff sessions
Digi CM User Guide 163
5 Use the ESC key when all parameters are entered to return to the main menu.
6 Choose Save changes.
Sniff sessions
To configure a port or all ports for sniff users, do the following:
1 Access the configuration menu.
2 Choose Serial port configuration.
3 Choose an individual port number or 0 (zero) for all ports > User access control.
4 Choose User Access Control.
5 Choose Enable/Disable Sniff Mode.
6 Choose a menu item and enter the desired parameters.
7 Use the ESC key when all parameters are entered to return to the main menu.
8 Choose Save changes.
For information on entering a sniff session, see the next section, View a sniff session.

Digi CM 8 Specifications

General

Brand	Digi
Model	CM 8
Category	Network Hardware
Language	English