Emerson Aventics G3 Series User Manual

G3 Series EtherCAT
TM
Technical Manual
5-42
TDG3ECM1-5EN 07/2020
Subject to change without notice
www.asco.com/g3
Advanced Settings – Brightness
Brightness Settings
5. Press the SET button to enter the ADVANCED SETTINGS
menu.
6. Press the NEXT button to scroll to the option
7. “SET BRIGHTNESS”
8. The current state of the parameter is shown
9. Press the SET button to change this parameter
Press the NEXT button to scroll the choices for the desired
brightness of the graphic display for all modules on the G3
system.
d. LOW
e. MEDIUM
f. HIGH (Factory Default)
Press the SET button to confirm your choice. The changes
will take effect immediately.
Brightness Settings
1. Press the SET button to enter the ADVANCED SETTINGS
menu.
2. Press the NEXT button to scroll to the CONFIG MENU / SET
BRIGHTNESS.
Press the SET button to enter the CONFIG MENU / SET
BRIGHTNESS.
3. The current state of the parameter is shown
4. Press the SET button to change this parameter
Press the NEXT button to scroll the choices for the desired
brightness of the graphic display for all modules on the G3
system.
a. LOW
b. MEDIUM
c. HIGH (Factory Default)
Press the SET button to confirm your choice. The changes
will take effect immediately.
ADVANCED
SETTINGS
ADVANCED
SET BRIGHTNESS
BRIGHTNESS
HIGH
BRIGHTNESS
LOW
BRIGHTNESS
MEDIUM
BRIGHTNESS
HIGH

Emerson Aventics G3 Series Specifications

General

Brand	Emerson
Model	Aventics G3 Series
Category	Industrial Equipment
Language	English