User Manual Section 5
GFK-2958L May 2021
Detailed Description of I/O Modules 336
5.30 Analog Output Module EP-4164
Figure 189: Analog Output
Module EP-4164
Figure 190: Connection Diagram EP-4164
The analog output module EP-4164 can control up to four analog actuators with ±10V, ±5V,
0-10V, 0-5V, 2-10V, 1-5 V, 0-20 mA or 4-20 mA. The resolution is 16 bits per channel. An
output can be connected to each connector, the internal switching is carried out
automatically. The output range is defined using parameterization. A status LED is assigned
to each channel. The outputs are supplied with power from the output current path (IOUT).
CAUTION
The outputs as well as the sense-lines of the AO modules must not be used as power
outputs.
To Next Page
Loading...
Need help?
General
