User Manual Section 9
GFK-2958L May 2021
Web Server 454
9.1 Requirements
The RSTi-EP station must be completely assembled and supplied with voltage.
9.1.1 Operating System
The RSTi-EP web server is designed for operation with the Windows
®
XP, Windows 7 and
Windows Vista operating systems.
9.1.2 Browser
The RSTi-EP web server can be used with the following browsers:
•
Microsoft
®
Internet Explorer
®
9, 10, 11
•
Mozilla
®
Firefox 4.0 or higher
•
Opera10.61 or higher
•
Google
®
Chrome 9.0 or higher
9.1.3 Device Drivers
Download the driver files usb8023.inf and rndis.inf from
https://www.emerson.com/Industrial-Automation-Controls/support
Installing the USB Driver
Note: The USB port acts as a virtual DHCP Server. Please do not assign any IP addresses to
other devices within the same subnet of the USB port (default 192.168.1.0), otherwise
network failure might occur.
•
To install the USB driver
1.
Start up your PC.
1.
Connect the PC to the network adapter using a USB cable (Type USB-A to USB
Micro-B). The USB socket at the network adapter can be found behind the service
flap.
Note: The USB cable can be a maximum of 2m in length. Extension cables must not be
used.
2.
You receive the message that Windows cannot install the driver.
3.
To install the driver manually, open the Device Manager. Under Other devices the
interface RSTi-EP NA displays.
To Next Page
Loading...
Need help?
General
