User Manual Section 4
GFK-2958L May 2021
Detailed Descriptions of the Fieldbus Network Adapters 64
0.14 – 1.5 mm2 (AWG 16 –
26)
-20°C to +60°C (-4 °F to +140 °F)
-40°C to +85°C (-40 °F to +185 °F)
Air humidity (operation/transport)
5% to 95%, noncondensing as per DIN EN 61131-2
The GSD file is available on the Support website
https://www.emerson.com/Industrial-Automation-
Controls/support for download and import into PAC
Machine Edition. The GSD supporting a firmware
release is part of the firmware upgrade kit, also available
on the Support website.
General data: refer to Section 1.3, General Technical Data for the Fieldbus Network Adapter.
4.1.5 Modifiable Parameters EPXPBS001
192.168.1.202; 192.168.2.202,
192.168.3.202, 192.168.4.202,
192.168.5.202
For mode V0, the alarm triggers are set in the parameter data.
These switches are always
selectable, but they only have a
function in mode V0. Diagnostic
messages are generated which
are not acknowledged by the
PLC.
In mode V1, the alarm triggers are set in the engineering environment.
These switches can be selected
only in mode V1, in V0 they are
inactive. Diagnostic messages
are generated which are
acknowledged by the PLC.
Identifier-related diagnosis
A diagnostic block is attached to
the diagnostic message.
Channel-related diagnosis
A diagnostic block is attached to
the diagnostic message.
A diagnostic block is attached to
the diagnostic message.
To Next Page
Loading...
Need help?
General
