Emerson PACSystems RSTi-EP User Manual

User Manual Section 4
GFK-2958L May 2021
Detailed Descriptions of the Fieldbus Network Adapters 134
4.5.9 Object descriptions EPXEIP001: Vendor Specific Classes
Class
Attribute
Get
Set
NV
1)
Data Type
2)
Name
Description
hex
dez
Gateway 0x64 (100)
Instance 0x00 (0)
0x64
100
x
UINT
Revision
Revision of this object
0x65
101
x
UINT
Max Instance
Highest possible instance of this
object
0x66
102
x
UINT
Number of Instances
Current number of instances
0x67
103
x
UINT
Max Class Attribute
ID of the last attribute of this
class in instance 0
Instance 0x01 (1)
0x64
100
x
x
UINT
Max Attribute
ID of the last instance attribute
0x65
101
x
x
STRING
Hardware Version
Hardware version of the
adapter
0x66
102
x
x
STRING
Software Version
Software version of the adapter
0x67
103
x
x
STRING
Serial Number
Full serial number of the
adapter
0x68
104
x
WORD
Status Word
Status word as in assembly
0x69
105
x
x
WORD
Control Word
Control word as in assembly
0x6A
106
x
x
x
BYTE
Parameter Fieldbus
error
Parameter “Output behavior on
fieldbus
error”; All outputs off (0) /
Enable substitute
values (1) / Hold last value (2)
0x6B
107
x
x
x
BOOL
Parameter Hot swap
Parameter “Module behavior on
hot swap”;
Continue data exchange (0) /
Behavior like
fieldbus error (1)
0x6C
108
x
Array of Struct
{USINT, BYTE,
Array of 2 BYTE}
Diag Summary
Diag bytes of all modules with
diag:
Byte 1: Slot number; Byte 2: Slot
state;
Byte 3-4: First two bytes of diag
0x6D
109
x
x
x
BOOL
Parameter Data
format
Parameter “Data format”;
Motorola (0) /
Intel (1)
0x6E
110
x
x
Array of 4 BYTE
Save/Restore Module
Parameter
Write SAVE to save the module
parameter;
Write LOAD to load the defaults
of the
module parameter
0x6F
111
x
Array of 64
DWORD
Current Module List
List of currently plugged
modules

Emerson PACSystems RSTi-EP Specifications

General

Brand	Emerson
Model	PACSystems RSTi-EP
Category	Controller
Language	English