User Manual Section 9
GFK-2958L May 2021
Web Server 470
Figure 323
9.7.9 Ending/Deactivating Forced Operations
•
To cancel a forced operation: Click Restore. All of the changes you made will not have
any effect.
•
To deactivate Force mode: Click Disable.
9.8 Updating Firmware
Before you can update the firmware, you must download the latest firmware file for each
network adapter and each module from https://www.emerson.com/Industrial-
Automation-Controls/support to your local PC.
Firmware files for the network adapter have the extension .bsc. For PROFINET network
adapters, for instance, the file might be named EPXPNS001_.......xyz.bsc.
Firmware files for IO modules have the extension .bsm. For Analog input modules, for
instance, the file might be named EP-3_.......xyz.bsm.
The language files will be in the format NA-….xyz.lng.
Note:
• You can determine for each module separately whether an update shall proceed.
• A firmware update cannot be undone. The old firmware in the network
adapter/module is overwritten.
• Make sure that the power supply is not interrupted while the firmware files are being
loaded
•
To update firmware
To Next Page
Loading...
Need help?
General
