User Manual Section 6
GFK-2958L May 2021
Installation 403
Figure 235: Use in Potentially Explosive Atmosphere
6.1.6 Installation Orientation
The RSTi-EP station is usually installed on a horizontally positioned DIN rail.
Figure 236: Installation Position of the RSTi-EP Station on the DIN Rail (Horizontal
Installation)
Installation on vertically positioned DIN rails is also possible. In this event, however, the heat
dissipation is reduced such that the derating values change (refer to Section, Current
Demand and Power Supply).
In the case of vertical mounting, the field-bus network adapter must always be arranged as
the first module at the bottom and secured with a reinforced end bracket for vertical
mounting.
To Next Page
Loading...
Need help?
General
