User Manual Section 6
GFK-2958L May 2021
Installation 404
6.1.7 Clearances
Note: Depending on how the station shielding is implemented, the specified
distances may have to be larger than those given below.
Ensure compliance with the minimum permissible cable bending radius.
In order to carry out the installation and further maintenance work and to ensure enough
ventilation, the RSTi-EP station must be installed while observing the following Clearances.
Earth terminals already installed can be ignored when calculating the distance.
Figure 237: Clearances with Horizontal Installation
To Next Page
Loading...
Need help?
General
