Emerson PACSystems RSTi-EP User Manual

User Manual Section 3
GFK-2958L May 2021
Configuration 35
3.9 Parameter Overview
3.9.1 Modifiable Parameters for Network Adaptors
Product
Part No.
Parameter
Optional values
Default value
PROFIBUS DP-V1
Network Adapter
EPXPBS001
DP-Alarm mode
V0 / V1
V1
DP alarm mode V0
For mode V0, the alarm triggers are set in the
parameter data.
Diagnostic alarm
†
enabled / disabled
disabled
Process alarm
†
enabled / disabled
disabled
Hot-plug alarm
†
enabled / disabled
enabled
†
These switches are always selectable, but they only have a function in mode V0.
Diagnostic messages are generated which are not acknowledged by the PLC.
DP alarm mode V1
In mode V1, the alarm triggers are set in the
engineering environment.
Diagnostic alarm
††
enabled / disabled
disabled
Process alarm
††
enabled / disabled
disabled
Hot-plug alarm
††
enabled / disabled
enabled
††
These switches can be selected only in mode V1, in V0 they are inactive.
Diagnostic messages are generated which are acknowledged by the PLC.
Identifier-related
diagnosis
†††
enabled / disabled
enabled
Channel-related diagnosis
†††
enabled / disabled
enabled
Module status
†††
enabled / disabled
enabled
†††
A diagnostic block is attached to the diagnostic message.
Data format
Motorola / Intel
Motorola
Fieldbus error output
behavior
All outputs off /
activate replacement values/
retain last value
All outputs off
Module behavior during hot
swap
Continue data exchange /
behavior as with fieldbus error
Continue data
exchange

Emerson PACSystems RSTi-EP Specifications

General

Brand	Emerson
Model	PACSystems RSTi-EP
Category	Controller
Language	English