Fujitsu M10 User Manual

XSCF>

adduser

jsmith
XSCF>

adduser

-u

359

jsmith
XSCF>

password

jsmith
Password:
Retype

new

password:
passwd:

password

updated

successfully
XSCF>
XSCF>

password

-M

60

-w

15

jsmith
Table 7-3
User privilege
User privilege Overview Description of privilege
platadm Manage the whole
system.
- Can perform all hardware operations for
the system.
- Can manipulate all XSCF settings except
those requiring the useradm and XSCF
audit privileges.
- Can add/delete hardware in a PPAR.
- Can perform power operations for a
physical partition.
- Can refer to all of the status of
the server.
7.2 Setting a User Account and Password
Set a user account and password appropriate to the use environment, and assign a
user privilege to the user account.
1.
Execute the adduser command to add a user account.
The following example specifies jsmith for the user account name. If -u is not
specified, the UID is automatically assigned.
The following example
adds a user account with a UID specified.
2.
Execute the passw ord command, and specify a password .
The following example specifies 60 days for the expiration time and 15 days
ahead for the start date for warnings before the password expires.
3.
Execute the setprivileges command to assign a user privilege to the
user
account.
The setprivileges command can set the following as user privileges for the entire
system.
Fujitsu M10/SPARC M10 Systems Installation Guide
･
July 2015198

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English