Fujitsu M10 User Manual

the delivered components of a
n
expa
n
sio
n
rack."
Table 3-6
Reference: List of accessories for the PCI expansion unit
Name Quantity Remarks
PCI expansion unit 1
Power cord 2 For 100 VAC or 200 VAC (*1)
Core 2 Used when attached to power cord
Rack mount kit 1 set
Cable support 1 set
Link cable (optical, 10 m)
2 Either of two types of cables is selected (*2)
Link cable (electrical, 3 m)
Management cable 1 (*2)
Link card 1 Card for mounting in the SPARC M10-1/M10-4/M10-4S
chassis (*3)
*1 The power cord is ordered separately (required option), so it may not come with the product.
*2 If ordered at the same time as the SPARC M10, the cable is supplied with the SPARC M10.
*3 If ordered at the same time as the SPARC M10, the card is shipped mounted
in the SPARC M10.
2.
Check for incomplete engagement, incomplete contact, or looseness in the
mounting of a PCI Express card or internal disk that may have been caused
by vibration during transportation or moving of the equipment.
3.2.4 Confirming the delivered components of the PCI
expansion unit
This section describes the confirmation of delivered components of the PCI
expansion unit.
1.
Confirm the delivered components by referring to the List of Attachments that
comes with the PCI expansion unit.
Table 3-6 below is a list of accessories for the PCI expansion unit. The accessories
may change without notice.
2.
Check
for incomplete engagement, incomplete contact, or looseness in the
mounting of a PCI Express card that may have been caused by vibration
during transportation or moving of the equipment.
3.2.5 Confirming the delivered components of an
expansion rack
An expansion rack is a dedicated rack required for connecting each SPARC M10-4S
Chapter 3 Installing the System 71

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English