Fujitsu M10 User Manual

Table 2-1
List of items requiring confirmation before installation (continued)
Check item Check
column
Installation
location
- Has the system installation location been determined?
- Does the placement of each chassis meet the service area
requirements?
- Have the chassis been placed so that their air intakes do not
take in exhaust from other equipment?
- Have the rack installation requirements been met?
Access route - Has the access
route for the rack been secured?
Environmental
conditions
- Does the installation location meet the temperature and
humidity conditions?
- Can the environmental conditions at the installation location
be thoroughly maintained and controlled?
- Have security measures been established for the installation
location?
- Does the installation location have sufficient fire exting uish i n g
equipment?
Power supply
facilities
- Do you know the voltage available for the racks where each
chassis and peripheral will be mounted?
- Are the power supply facilities sufficient for the individual
chassis, monitors, and peripherals?
- Are the power supply facilities within an appropriate
distance from the racks?
Network
specifications
- Do you
have the necessary information for network
connections?
CPU Activation - Has the volume of resources to be used during initial
installation been determined?
- Have the required CPU Activations been ordered?
2.3 Confirming the Physical Specifications
of the System
This section describes the physical specifications of the system that require
confirmation before installation. Confirm that the installation location meets these
requirements.
Fujitsu M10/SPARC M10 Systems Installation Guide
･
July 201522

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English