19. RECORDING FUNCTIONS
19-6
19.3 Voyage Log
The [Voyage] log records all voyage-related data of the past three months. Recorded
events are:
• [Date]: Date of entry
• [Time]: TIme of entry
• [Source]: No. of unit which generated log
• [Type]: Log entry types
• [Auto]: Automatic entry of ship position, in 1 to 4 hr intervals, set by operator.
• [Ship]: Logged if speed or course exceed operator-set values.
• [MOB]: MOB position, entered with [MOB] button.
• [User]: Operator-entered position. The information entered in the [Description] box
is logged.
• [Posdev]: Operator-entered GPS position or LOP. The information entered in the
[Description] box is logged.
• [Latitude], [Longitude]: Latitude and longitude position
• [SOG/kn], [COG/°T], [HDG/°T]: Speed over the ground, course over the ground,
heading.
• [CORR/°T]: Offset bearing, if used
• [Wind/kn], [Wind/°T]: Wind speed and angle
• [Dist/NM]: Offset distance
• [Depth/m]: Depth in meters
• [Description]: The latitude and longitude position and bearing (or distance) of a max-
imum of three objects are automatically recorded to each log entry. An object whose
position accuracy is low is not recorded. If an object has both a bearing and distance,
separate entries are made.
If desired the description can be edited. Click the applicable Description block to
show the [Edit Description] box. Edit the description as required then click the [OK]
button.
L/L position, bearing of object (no.1)
To Next Page
Loading...
Need help?
General
