4-48
GTN 625/635/650 Pilot’s Guide
190-01004-03 Rev. P
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
4.6 Import Flight Plans with a Datacard
Flight plans can be created on a computer using compatible flight planning
software and saved to the datacard to be imported into the GTN. The imported
flight plans can then be activated or stored to the flight plan catalog once they
are previewed by the pilot.
NOTE: Flight plans over 99 waypoints long are truncated at 99 waypoints
and the last waypoint in the imported/uploaded flight plan may not be the
destination airport.
NOTE:
This feature is available in software v5.10 and later.
NOTE:
The flight plan file format used by the GTN is different than the file
format used by the GNS 400W/500W Series navigators.
1. While viewing the Flight Plan page, touch the Menu key and
then the Catalog key to display the Flight Plan Catalog.
Touch to Import
Flight Plan
Figure 4-80 Catalog for Datacard Flight Plan Import
2. An Import key will be present in the menu bar when flight
plans are present on the datacard. Touch the Import key to
open a pop-up with a list of the file names of the flight plans
on the datacard.
To Next Page
Loading...
Need help?
General