15-30
GTN 625/635/650 Pilot’s Guide
190-01004-03 Rev. P
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
15.6 User Fields
The User Fields selection allows you to configure the data field type shown at
the right of the display when it is not occupied by the control for a transponder.
The data shown in the field may be selected from a list after touching the desired
field.
NOTE: Data Field Types that use the term "Destination" refer to the final
destination in the flight plan.
NOTE: ETE to Destination is not available when a procedure is loaded and
there are waypoints in the Enroute section of the flight plan.
1. While viewing the System page, touch the User Fields key,
then touch an available field on the side of the display.
Touch to Select
Data Type
Touch to Restore
Defaults
Figure 15-39 User Fields Selection
2. Touch the Data, Function, or Page tab to display a list
of available selections. A list of information types will be
displayed.
Field Type List
Touch to Select
Data Field
Selected Field
Type
Slider Indicates More
Selections Available
Press Finger and
Slide To View More
Selections
Figure 15-40 Map Data Field Type Selections
3. Touch the Up or Down keys or touch the display and drag
your finger to scroll through the list. Touch the desired item
to select it or touch the Back key to cancel selection.
To Next Page
Loading...
Need help?
General