2-7190-01004-03 Rev. P
GTN 625/635/650 Pilot’s Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
2.1.6 GDL 88 ADS-B Reporting
The GDL 88 is a remote-mount ADS-B transceiver that sends ADS-B out
messages to ATC and other aircraft and communicates ADS-B In data to
panel-mounted avionics for the display of traffic and weather. Reference the
GDL 88 Pilot Guide for a full description of GDL 88 functions. When a GTN is
interfaced to a GDL88 transceiver for ADS-B Out functions the GTN can control
some aspects of the ADS-B Out message and the GTN may provide position
information to the GDL88. The display and control of the information sent
depends on the equipment installed and how it is configured by the installer.
Some installations allow control by the pilot of the information sent, while
others do not.
The Anonymous Mode, when armed, will replace the identifying information
in the ADS-B Out message with a temporary randomized number for privacy
while the position information will still be provided. The call sign will be sent as
"VFR." To enable Anonymous Mode, the Squawk Code must be set to the VFR
code (based on the GDL 88 configuration) and the Anonymous key must be
selected.
Viewing the ADS-B Control Panel Without Integrated Transponder Control
1. Touch the Transponder window to view the ADS-B control
panel.
Touch to View ADS-B
Control Panel
Current Flight ID
Altitude
Reporting
Status
Figure 2-13 ADS-B Control Panel
2. Touch the ADS-B window again to return to the previous
display.
To Next Page
Loading...
Need help?
General