EasyManuals Logo

Garmin GTN 635 User Manual

Garmin GTN 635
610 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #532 background imageLoading...
Page #532 background image
15-42
GTN 625/635/650 Pilot’s Guide
190-01004-03 Rev. P
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
15.11.1 Operation
Data output from the GTN and Flight Stream occurs automatically and
requires no pilot action (such as, flight plan, GPS position, and attitude).
Additionally, ADS-B traffic and weather can be output from the Flight Stream
when connected to a GDL 88 or GTX 345 and XM WX and SiriusXM satellite
radio information can output when connected a GDL 69. From the Connext
Setup page, the pilot can enable/disable flight plan importing, change the Flight
Stream Bluetooth name, and manage paired devices. The Flight Stream 210 and
510 also support sending and receiving GSR 56 SMS messages and controlling
the GSR 56 Iridium phone when used with a compatible portable application.
From the Connext Setup page, the pilot can enable/disable Flight Stream
features (flight plan importing, phone/SMS, and database transfers), setup Flight
Stream Bluetooth and Wi-Fi, and manage paired Bluetooth devices.
On the GTN's Paired Devices page, the device status indicates if the
portable device is connected and communicating with the Flight Stream. The
“Auto-Reconnect” setting determines if the Flight Stream will automatically
connect to up to four devices when in range. When this setting is disabled,
the pilot must initiate the connection from the device. For devices that always
reconnect automatically, this setting will not be shown. Removing a device from
this page by pressing “Remove” will require the device to be paired again before
transferring data.
NOTE: If the pairing is removed from either device (portable device or
GTN) it must be removed on the other device before a new pairing to that
same device is established again. Essentially, pairing must be removed on
both devices before repairing.
Device is Connected
and Communicating
Touch to Remove
the Device
Touch to Automatically
Connect to the Device
When in Range
Figure 15-59 Managing Paired Devices

Table of Contents

Other manuals for Garmin GTN 635

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Garmin GTN 635 and is the answer not in the manual?

Garmin GTN 635 Specifications

General IconGeneral
BrandGarmin
ModelGTN 635
CategoryGPS
LanguageEnglish

Related product manuals