5-3190-01004-03 Rev. P
GTN 625/635/650 Pilot’s Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
5.2 Direct-To a Flight Plan Waypoint
The Direct-To selection is not available for all flight plan entries. Some
flight plans entries including holds and course reversals cannot be selected for
Direct-To. Instead, select the associated waypoint for the Direct-To function.
1.
Press the Direct-To key on the right side of the unit.
2. Touch the FPL tab on the left side of the Direct-To window.
Touch Waypoint
Key to Select
Flight Plan
Waypoint List
Flight Plan Tab
Figure 5-4 Direct-To Flight Plan Leg Selection
3. Touch the leg of your flight plan you want to use. The Direct-To
Waypoint page will display information about the selected flight plan
waypoint.
Touch to Activate
Direct-To Nav to
this Waypoint
Waypoint Detail
Waypoint Tab
Touch to Select a
Specific Course
Figure 5-5 Selected Direct-To Flight Plan Leg
4. Touch the Activate key or press the small right knob to
activate the selection.
5. The Map page will now be displayed with the new Direct-To
course.
To Next Page
Loading...
Need help?
General