15-28
GTN 625/635/650 Pilot’s Guide
190-01004-03 Rev. P
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
15.5 Alerts Settings
The Alerts Setup page controls two functions: Arrival Alerts and Airspace
Alerts. Arrival Alerts, when active, will generate a message when the aircraft
is within the selected proximity of the destination. Airspace Alerts generate a
message and filtering of the Nearest Airspace list. The altitude component of
Airspace Alerts are dependent on both aircraft and airspace altitude and the
values set for the Altitude Buffer.
15.5.1 Arrival
1. While viewing the Setup page under the Systems heading,
touch the Alerts key.
Touch to Select
Distance Values
Select Airspace
Types
Arrival
Figure 15-35 Alerts Setup Page
2. Touch the Arrival key to toggle activation. A green bar will
appear when it is active.
15.5.2 Proximity
Touch the Proximity key to set the Destination Proximity
distance values. A numeric keypad will appear. Select the
desired values and then touch Enter.
Use the Numeric
Keypad to Select
Proximity Value
Touch Key to
Delete Values
Selected Proximity Value
Figure 15-36 Arrival Alert Proximity Selection
To Next Page
Loading...
Need help?
General