Garmin GTN 635 User Manual

14-7190-01004-03 Rev. P
GTN 625/635/650 Pilot’s Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
14.1.3 Vertical Speed (VS) Profile
This value sets the vertical speed.
1. While viewing the VCALC page, touch the VS Profile key.
Numeric
Keypad
Selected
Vertical
Speed
Backspace
Key
Touch Enter or
Press Small Knob
to Save Value
Figure 14-7 Select VCALC Vertical Speed
2. Use the numeric keypad to select the desired Vertical Speed
and then touch the Enter key.
14.1.4 Target Offset
The Target Offset is a pilot-selected distance value that represents the
geographical location where you wish to arrive at the target altitude. This
distance is measured from the Target Waypoint and, in a separate data field on
the VCALC page, designated as either before or after the Target Waypoint.
1. While viewing the VCALC page, touch the Offset key.
Selected
Target
Offset
Backspace
Key
Touch Enter
or Press Small
Knob to Save
Number
Numeric
Keypad
Figure 14-8 Select VCALC Target Offset
2. Use the numeric keypad to select the desired Target Offset and
then touch the Enter key.

Garmin GTN 635 Specifications

General

Brand	Garmin
Model	GTN 635
Category	GPS
Language	English