Hioki MEMORY HiLOGGER LR8450 User Manual

216
Controlling the System
7.2 Controlling the System
This section describes how to set the time and initialize (reset) the instrument.
It also describes how to perform a self-check.
Setting the time
The instrument has a calendar with automatic leap year detection as well as a 24-hour clock.
The clock is displayed in YYYY-MM-DD HH:MM:SS format at the bottom right of the screen. Set the
time if the displayed time diverges from the actual time.
The time is used when starting measurement (start trigger time) and in le information.
> >
1
1
2
2
4
4
3
3
1
Press the ENTER key while [Clock settings...] is selected.
The settings window will open.
2
Congure the year, month, day, hour, minute, and second settings.
3
Select [Time zone], and then press the ENTER key.
Default setting: [GMT+9]
4
Press the ENTER key while [OK] is selected.
The time will be updated to reect the new settings.
Press the ENTER key while [Cancel] is selected to close the window without changing the time.
HIOKI LR8450A964-03
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Hioki MEMORY HiLOGGER LR8450 Specifications

General

Brand	Hioki
Model	MEMORY HiLOGGER LR8450
Category	Data Loggers
Language	English