Hioki MEMORY HiLOGGER LR8450 User Manual

38
Conguring Input Channels
Measuring CAN signals
For more information, see the “CAN Editor Instruction Manual” on the included CD.
Applicable modules: U8555, LR8535
Integrating pulses
You can perform measurement by integrating the pulse count from an integrating wattmeter, ow
meter, or similar device.
This section describes how to congure settings on the individual settings screen when performing
integration measurement.
You can use the settings list screen to congure the settings. (See p. 69.)
External control terminals: Pulse input terminals P1 to P8
> >
4
4
1
1
5
5
6
6
7
7
3
3
8
8
9
9
2
2
1
Select [Pulse], and choose a channel from [P1] to [P8].
Measurement will not be performed for channels whose check boxes are not selected.
2
Select the waveform display color.
× (OFF), 24 colors
Select [×] if you wish to measure the channel but not to display its waveform or numerical values on the
screen.
3
Set the input type to [Count].
The range cannot be changed from 1000 Mc.
The measurable range will appear.
4
Under [Count mode], select the integration method.
Addition

Integrates pulse counts inputted from the measurement start point.
Instant Integrates pulse counts inputted during the recording period. The pulse count will be
reset for each recording interval.
HIOKI LR8450A964-03
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Hioki MEMORY HiLOGGER LR8450 Specifications

General

Brand	Hioki
Model	MEMORY HiLOGGER LR8450
Category	Data Loggers
Language	English