Hioki MEMORY HiLOGGER LR8450 User Manual

399
Maximum Recording Times
11.11 Maximum Recording Times
The maximum amount of time during which data can be stored in the instrument’s internal bu󰀨er
memory or on its storage media can be calculated as shown below.
If saving data in binary format, the maximum recording time can be calculated using the following
formula:
Maximum recording time = Recording capacity*
1
× recording interval (s) / data size*
2
*1: For the instrument’s internal bu󰀨er memory (256 Mwords), 512 × 1024 × 1024.
*2: Data size as described in “11.9 File Size” (p. 395).
Maximum recording times (rough estimates)
Example: Measuring 30 analog channels with 2 modules (no alarm output, no waveform
calculations)
Reduce the times shown in the following table by approx. 10% since they do not take into account
the size of waveform le headers. The fewer channels are recorded, the greater the maximum
recording time.
Recording
interval
Internal bu󰀨er memory (512 MB) Z4001 (2 GB)
100 ms 10 d 8 h 38 d 18 h
200 ms 20 d 17 h 77 d 12 h
500 ms 51 d 18 h 193 d 19 h
1 s 103 d 13 h 387 d 15 h
5 s 500 d 1162 d 21 h
10 s 500 d 3876 d 8 h
Knowledge and Information
HIOKI LR8450A964-03
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Hioki MEMORY HiLOGGER LR8450 Specifications

General

Brand	Hioki
Model	MEMORY HiLOGGER LR8450
Category	Data Loggers
Language	English