392
Filenames
11.7 Filenames
Filenames consist of the following parts:
WAVE0001.MEM
1
2
3
No. Item
1
File type
2
Automatic numbering
3
Extension
Data type Folder File type
Automatic
numbering
Extension
Setting conditions CONFIG CONF Starting at 0001 .SET
Waveform data DATA *
1
WAVE *
2
AUTO *
3
Starting at 0001 .MEM
.CSV *
4
.MF4
Numerical calculation
results:
Without
segmentation
MEASUREMENT
/ALL
MEAS *
2
AUTO *
3
Starting at 0001*
5
.CSV *
4
Numerical calculation
results:
With segmentation
MEASUREMENT
/PART
MEAS *
2
AUTO *
3
Starting at 0001*
5
.CSV *
4
Screen images PICTURE SCR Starting at 00001 .PNG
A2L A2L LR8450S Starting at 0001 .A2L
*1: Dated folders are created automatically. In delete-and-save operation, the oldest waveform les are
deleted rst.
Once all of the waveform les in the dated folder have been deleted, the folder will be automatically
renamed.
Example: 19-12-26 (before update) → 19_12_26_191230_101113 (after update: date_date of update_
time)
Hyphens (“-”) are changed to underscores (“_”), and the date on which the folder was renamed is added
to the end of the name.
(Updated at 10:11:13 am on December 30, 2019)
*2: If saved manually.
*3: If saved automatically. If a lename has been specied, that lename will be used.
*4: If [Delimiter] is set to a setting other than [Comma], the extension will be [.TXT].
*5: If [File splitting] under [Numerical calculation results] is set to [Individual calc], the number (starting
at 0001) will be followed by an underscore (“_”) and the calculation number.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com