Honeywell 8680i User Manual

160 8680i User Guide
IMGSHP Modifiers
A - Infinity Filter
Enhances pictures taken from very long distances (greater than 10 feet or 3m). The
Infinity Filter should not be used with IMGSNP Modifiers (page 156).
0A Infinity filter off (default)
1A Infinity filter on
Example:
C - Compensation
Flattens the image to account for variations in illumination across the image.
0C Compensation disabled (default)
1C Compensation enabled
Example:
D - Pixel Depth
Indicates the number of bits per pixel in the transmitted image (KIM or BMP format
only).
8D 8 bits per pixel, grayscale image (default)
1D 1 bit per pixel, black and white image
Infinity Filter off (0A)
from approximately 12 feet
(3.66m) away:
nfinity Filter on (1A)
from approximately 12 feet (3.66m)
away:
Compensation at 0C: Compensation at 1C:

Honeywell 8680i Specifications

General

Type	Wearable bar code reader
Sensor type	-
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Motion tolerance (cm/s)	584
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Code 39, PDF417, U.P.C.
2D (matrix & stacked) barcodes supported	Data Matrix, PDF417
Bluetooth version	4.1
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Product color	Black
Built-in display	No
International Protection (IP) code	IP54
Charging time	4 h
Battery voltage	3.6 V
Power source type	Battery
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	81 mm
Width	56 mm
Weight	- g