Honeywell 8680i User Manual

8680i User Guide 15
1.
The 8680i only supports connecting to Apple devices using Bluetooth HID mode.Set your
mobile device so it searches for other Bluetooth devices. (Refer to your mobile
device’s User’s Guide for pairing instructions.)
1. Scan the
Bluetooth HID Keyboard Connect bar code below.
2. On the mobile device, the 8680i scanner is shown as a keyboard. Click on it to
pair.
Note: See Enter a Bluetooth PIN on page 15 if your host device displays a PIN.
The Bluetooth symbol appears in the scanner window when the scanner pairs with
a mobile device.
Enter a Bluetooth PIN
If your host device does not automatically pair with the 8680i, a PIN is displayed.
This PIN must be scanned within 30 seconds. Using the 8680i, you must quickly
scan Bluetooth PIN Code below, then scan the numeric bar code(s) for the PIN
code from the chart below, then scan the Save bar code.
Bluetooth HID Keyboard Connect
Bluetooth PIN Code
0
1
2
3
4

Honeywell 8680i Specifications

General

Type	Wearable bar code reader
Sensor type	-
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Motion tolerance (cm/s)	584
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Code 39, PDF417, U.P.C.
2D (matrix & stacked) barcodes supported	Data Matrix, PDF417
Bluetooth version	4.1
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Product color	Black
Built-in display	No
International Protection (IP) code	IP54
Charging time	4 h
Battery voltage	3.6 V
Power source type	Battery
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	81 mm
Width	56 mm
Weight	- g